| PLASTIC SANDING NEEDLES - assorted pack
£6.26 (€7.01) ($7.64)
Pratique
A highly effective sanding device. particularly useful for sanding / cleaning holes, irregular shaped apertures, air intakes, exhausts, cockpits and cupolas etc...
Colour coded for easy work bench indentification.
grey colour: 150 grit (coarse)- blue colour: 240 grit (medium)- white colour: 320 grit (fine). Set of 2 sanding needles each grad.
Stock code: ALB-AB4444
|
|
| MICRO STICKY STIX
£13.40 (€15.01) ($16.35)
Pratique
Sticky Micro Stix are great for placing small parts in hard to reach spots. Pack contains 8 "Green smart hold" easy release and 8 "Blue Original" stronger hold adhesive ends. They are reusable, long-lasting, and made in the USA by Microbrush International.
Stock code: FLEX2716
|
|
| TRIPLE GRIT FINISHER
£4.47 (€5.01) ($5.45)
Pratique
Extremely useful polishing / finishing file incorporating 3 very fine grits in one file. Achieve a perfect finish on any surface prior to painting or display.
Stock code: FLEX3210
|
|
| FLE-I-FILE - STARTER SET
£13.40 (€15.01) ($16.35)
Pratique
1 aluminium frame and 6 grit tapes: 600 - 400 - 320 - 280 - 150(2) grad
Stock code: FLEX700
|
|
| TOUCH-n-FLOW APPLICATOR
£7.84 (€8.78) ($9.56)
Pratique
Revolutionise your model building! This ingenious glue applicator has the following distinct advantages over conventional brush and nozzle applicators: - capillary action draws the solvent from the reservoir to precisely where it's needed on the model or plastic card. - Small bore nozzle allows for pin point accuracy. - Join seams with a continous application, no stopping to refill a brush. - One refill is normally enough for entire session of building. - clever design means it's ready for immediate use with no evaporation worries.
Stock code: FLEX711
|
|
| CYANOCRYLATE APPLICATOR TOOL
£7.84 (€8.78) ($9.56)
Pratique
The C/A applicator tool is a unique tool for applying cyanocrylate cement in a special and unique way. Hold the C/A applicator in one hand and dip the tip into a small puddle of C/A cement. The C/A applicator will pick up a small amount of C/A cement and apply it where you want it! You can wipe off the tip with a paper towel or piece of cloth. A small amount of acetone will also help. If the C/A applicator becomes clogged or has a build-up at the tip, a small hobby knife will remove it.
Stock code: FLEX805
|
|
| SIDE CUTTER
£9.32 (€10.44) ($11.37)
Pratique
revell
Special side cutter for precisely cutting our parts from the sprue frame.
Stock code: RV39000
|
|
| MODEL CHISEL - F1 (1X1mm)
£6.21 (€6.95) ($7.58)
Technique
trumpeter
Engraving tool for modeling.
Stock code: TR09923
|
|
| MODEL CHISEL - F2 (2X2mm)
£6.21 (€6.95) ($7.58)
Technique
trumpeter
Engraving tool for modeling.
Stock code: TR09924
|
|
| MODEL CHISEL - F3 (3X3mm)
£6.21 (€6.95) ($7.58)
Technique
trumpeter
Engraving tool for modeling
Stock code: TR09925
|
|
|
Please select category
